Fellowes Metal E-200r Manual Del Usuario página 11

COIL DIAMETER & DOCUMENT SIZES
Metal coil diameter sizes
To select the correct size metal coil for a document use the document measure card, stored in the storage tray.
SET UP
1
Ensure the machine is on a
stable surface.
4
Plug the machine into an easily accessible
mains socket. Switch the mains supply on.
BEFORE YOU BIND
1
Tabla Orientativa de Medición
Guia de medidas
Document Measure
Select the correct coil diameter to
suit the document.
2
Check the waste tray is empty
and correctly fitted.
Switch the machine on using the power switch
located at the rear of the machine.
2
Test punch scrap sheets to check
edge guide setting.
Tabla Orientativa de Medición
Guia de medidas
Document Measure
3
Fit the supplied power lead to
the power socket at the rear of
the machine.
5
3 3
Adjustable back-stop margin feature. Set the guide to suit the back
margin size required (2,3,4 or 5mm) Eg: 2mm suits small documents
(2-50 sheets), 5mm suits the largest documents (200-450 sheets)
11