Main Technical Features - Kübler CODIX 130 Manual De Instrucciones

AC input modes:
Count: Counting and reset inputs
INP A: AC/DC counting input
INP B: AC/DC reset input
Cnt.Dir: Counting and counting direction input
INP A: AC/DC counting direction input
INP B: AC/DC counting input

Main technical features:

Display: LCD, 8 decades, height of the figures 8 mm.
Display range:
-9999999 ... 99999999
with leading zeros suppression.
Overflow: In case of a display range overflow, the
counter starts again from 0, but without
removing the leading zeros and activating
all decimal points.
In case of a display range underflow, the
counter starts again from 0 and displays the
minus sign, without removing the leading
zeros and activating all decimal points.
Keys: Electrical locking of the reset key
Housing: Panel mounting, 48 x 24 mm
according to DIN 43 700, RAL 7021
Panel cut-out:
22,2 +0,3 x 45 +0,6
Mounting depth: approximately 48 mm
Weight: approximately 50 g
Protection level: IP65 on the front side
Connection:
Screw terminals, RM 5.00, 8 poles
Rated cross-section: 4,0 mm
Connection diameter:
8
mm
2 single-wire
2
2,5 mm thin wire
AWG 12
0,4 ... 2,3 mm single-wire
AWG 28-12
Up.Dn: Differential counting input
INP A: AC/DC subtracting counting input
INP B: AC/DC adding counting input.
EMC: Interference emissions EN55011 Class B
Interference resistance EN 61000-6-2
Device safety:
Design to: EN61010 Part 1
Protection Class: 2
Application area: Soiling Level 2
Low Voltage Directive (for the AC models):
EN 61010 Part 1 ; overvoltage category 2,
contamination level 2
Power supply:
Non-replaceable lithium battery
(lifetime approximately, 8 years at 20°C)
Working temperature:
–10 ... +55 °C, relative humidity < 85%,
without condensation
Operating temperature:
–10 ... +60 °C
Storage temperature:
–20 ... +70°C
Altitude: to 2000 m
Backlighting:
external electrical source
(24 V DC ±20 %, 50 mA)