Additional Precautions - Selecta S-2000 Manual De Instrucciones

MANUAL DE INSTRUCCIONES CODIGO 80202 REV A
J
.P. SELECTA s.a.u.
Feb/2012
Biohazardous Materials
Treat all samples and waste as potentially biohazardous and infectious.
Avoid direct contact with samples, waste solution and/or solid waste.
Both should be handled as potentially biohazardous.
Use gloves, glasses lab coat,.. as a general rule to operate S-2000 with real sam-
ples.
If any sample is spit on the instrument, use qualified procedures for decontamina-
tion and disinfection.
Avoid direct contact with waste solution and/or solid waste.
Both should be handled as potentially biohazardous.
Biohazardous parts
Avoid direct contact with the sipper tubing and all parts of the sample flow path.
Treat these areas as potentially biohazardous and /or infectious

3.3 Additional Precautions

• Flammables
Avoid using dangerous flammable material around the instrument.
• Accuracy/Precision of the Measured Results
For proper use of the instrument, measure control samples and monitor the instru-
ment during the operation.
An incorrectly measured result may lead to an error in diagnosis, thereby posing a
danger to the patient.
Treat all reagents according to the manufacturer's recommendations. Refer to the
reagent kit box and package inserts, or product information sheets for specific
instructions.
Make sure that the sample/reagent mixture does not contain any blood clots, dust
or other insoluble contaminants. If insoluble contaminants are contained in the
sample, correct measuring values may not be obtained.
• Application
The instrument is designed for clinical chemistry test analysis using water-soluble
samples and reagents.
Please note that other types of analysis may not be applicable to the instrument.
• Operation and Maintenance
During operation and maintenance of the instrument, proceed according to the in-
structors and do not touch any parts of the instrument other than those specified.
Never leave a Reagents/sample mixture in the flowcell for longer than necessary.
Always clean the flowcell after a batch of measurement and keep the flowcell filled
with distilled water when not in use.
Verify the front covers closed while the instrument in operation.
Avoid touching the mechanism, such as the sipper mechanism inside the instru-
ment, while the instrument is operating. This may cause operation stop or damage
the instrument.
Ctra. NII Km 585.1 Abrera 08630 (Barcelona) España
e-mail: selecta@jpselecta.es - website: http://www.jpselecta.es
(Sujetas a modificaciones sin previo aviso)
Tel 34 937 700 877 Fax 34 937 702 362
Pag.: 24