Unit Description; Front View; Quick Keyboard; Rear View - Selecta S-2000 Manual De Instrucciones

MANUAL DE INSTRUCCIONES CODIGO 80202 REV A
* Open the cover, just to
change the lamp or maintain
the pump.

5.1 Quick keyboard

J
.P. SELECTA s.a.u.
Feb/2012

5 Unit description

5.1 Front View

1. Pump cover:*
4. Sample button
7. Power-on indicator
5.2 Quick keyboard
1. Soft keyboard: Open or close soft keyboard.
2. Rinse On- Off: Pressing this control will switch on the sipper pump in a continuous
mode. Pressing the key again will stop the pumping action at the end of a complete
cycle.
3. Feed Paper: Control the printer paper for the embedded printer.
4. Print: Set the printer enable or disable.
5. Lamp On-Off: Turn off or turn on the lamp.
6. Left: This key is used to go backwards in a procedure.
7. Right: This key will advance the cursor to the next position.
8. Enter: This key is used to confirm an entry via the keyboard.

5.3 Rear view

1. Power switch
4. Fan
7. RS-232 interface
11. Drain Port
Ctra. NII Km 585.1 Abrera 08630 (Barcelona) España
e-mail: selecta@jpselecta.es - website: http://www.jpselecta.es
(Sujetas a modificaciones sin previo aviso)
2. Flow cell cover*
5. LCD Screen
8. Printer cover
2. Fuse
5. Printer interface
9. ext. keyboard
12. Pump
Tel 34 937 700 877 Fax 34 937 702 362
Pag.: 26
3. Sample tube
6. Hot-key
3. AC Mains port.
6. Mouse
10. Not Used