THOMSON TT200 Manual Del Usuario página 10

b) If the system cannot return to rest position automatically after playback of record use a cross head
screw driver and turning the alignment screw (7) inside the hole anti-clockwise, the stopping and eject
position of the tone arm will move more away from the center of the record for playback completion.
Remark:-
The stopping position is very subjective among difference customers, please select the most suitable
-
position based on your own record collection. The ex-factory setting is based on the most common
template.
- Please check the stopping position time by time during adjustment and avoid over turning of the screw
inside
Anti shock adjustment
This unit had built in suspension system for Anti shock function. Turn the anti shock screw (5) in
-
clockwise or anti clockwise direction to adjust to your derived anti shock level.
Don't throw the electrical and electronic appliances into the usual dustbin.
Bring them to a collecting point.
Some parts contained in these appliances may be dangerous for health and environment.
Imported by Bigben Interactive SA
CRT2 – RUE DE LA VOYETTE
59810 LESQUIN CEDEX FRANCE
www.bigben.eu
4
Made in China