Operating And Installation Instructions - IKEA KLASEN Manual Del Usuario

Ocultar thumbs Ver también para KLASEN:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Never fill the cylinder beyond 80% full.
Failure to follow these instructions exactly
may result in fire causing serious injury or
death.
Place dust cap on cylinder valve outlet
whenever the cylinder is not in use. Only
install the type of dust cap on the cylinder
valve outlet that is provided with the
cylinder valve. Other types of caps or plugs
may result in leakage of propane.
Connecting to the Cylinder
• Confirm all barbecue control knobs are in
the 'OFF' position.
• Connect the regulator to the gas cylinder,
tighten it securely and proceed according
to instructions below and the instructions
from the gas cylinder supplier.
Read carefully before use
2
3
Table (A)
COUNTRY
ES/PT
1

Operating and installation instructions

• KOSAN 35 is a domestic regulator used to
supply gas to utilities at specific pressure
and flow, as indicated on the label(1).
Fig 1
• KOSAN 35 must be fitted directly to the
cylinder featuring a Ø35mm (G.56) quick
connection valve. Make sure the regulator
inlet and outlet are compatible with the
OFF
cylinder and the appliance being used.
• The gas cylinder must always be kept
in the vertical position. Do not move
the cylinder during operation. When
Fig 2
the device is used outdoors, it shall be
positioned or protected against direct
penetration by any tracking water
• KOSAN 35 versions feature a release
valve (the marking "PRV" is visible on the
label (1) are generally not typeapproved
for use in closed premises (see local laws
Fig 3
on the subject).
• Never look for gas leaks with a live flame.
Use instead a solution of water and soap.
• In the event of any faults being found,
close the gas supply and immediately
INLET
OUTLET
HOSE NOZZLE
Jumbo
Ø10
7
Fig 4
ON
Fig 5
OFF
Fig 6

Publicidad

Tabla de contenido
loading

Tabla de contenido