Nice Seld Manual De Instrucciones página 22

5.1) Recording the transmitter codes
STEP
1 Press the
2 Enter the combination to access storage 333333
3 Confirm combination by pressing "
4 Enter "4" to record the 1
5 Confirm selection by pressing "
SELD will beep at constant intervals.
6 When the note sounds bring the transmitter up to SELD until it touches it,
keeping the key to be memorised depressed.
7 Check the code has been stored by pressing key "
8 Confirm storage by pressing "6" followed by "
The procedure is the same for storing the 1
STEP
4 Enter "5" instead of "4"
7 Enter "
Storing the 1
key
st code on SELD's 1
Storing the 2
" instead of " "
st Code
"
st channel
".
"
nd Code
st code with the differences indicated below:
- 22 -
" twice or three times