Campbell Hausfeld XT250000 Instrucciones De Operación página 4

u For best output, maintain pressure at the tool of 90 PSI or best output, maintain
pressure at the tool of 90 PSI.
u The longer your air hose the greater the pressure drop from compressor to tool.
If you are using a hose longer than 50 feet, consider upgrading to a 1/2 inch ID air
hose to ensure proper tool pressure.
u Failure to lubricate and maintain your air tools properly will dramatically shorten
their life. Use oil every time you use your air tool to lubricate, clean and inhibit rust
in one step. Campbell Hausfeld sells air tool oil under part number ST1270.
SPECIFICATIONS
Maximum pressure (PSI)
CFM no load 100% duty
SCFM no load 100% duty
Air Compressor Recommendation
RPM (free speed)
Collet size
Size Type
Variable Speed
Horsepower
Air Inlet
Minimum Hose Size
Housing Material
Tool Weight
Tool Length
Tool Height
Tool Width
BEST PRACTICES
2
XT250000
90
2.8 CFM@ 90 PSI
19.6 SCFM @ 90 PSI
20 gallon
25,000
1/4 inch
Straight
Yes
0.2 HP
1/4 inch NPT (F)
3/8 inch
Composite
0.8 Lbs.
6 inch
1-5/8 inch
2-1/8 inch