Product Specifications - Craftsman 580.752381 Instrucciones De Uso

Ocultar thumbs Ver también para 580.752381:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

PRODUCTSPECIFICATIONS
Pressure Washer Specifications
Pressure .....................
3,800 PSI
Flow Rate .....................
4.0 GPM
Detergent Mix .................
Use as directed
Water Supply Temperature .......
Not to exceed IO0°F
Pump Oil Capacity..............
12 fl. oz. (0.35 I)
Engine Specifications
RatedHorsepower ...............
13 at 3600 rpm
Bore ..........................
3.5 in. (88 mm)
Stroke .........................
2.5 in. (64 mm)
Displacement ...................
23.7 in. (389 cc)
Spark Plug
Resistor ....................
NGK BPR6ES
Set GapTo: ...................
0.028-0.031 in (0.70-0.80
mm)
IntakeValveClearance ............
0.15 ± 0.02 mm (cold)
ExhaustValveClearance ...........
0.20 ± 0.02 mm (cold)
FuelCapacity ...................
1.72 Gallons
Oil Type .......................
SAE10W-30
This pressure washer is rated in accordanceto the Pressure
Washer Manufacturers Association (PWIVIA)standard PW101
(Testing and Rating Performance of Pressure Washers).
OWNER'S RESPONSIBILITIES
Follow the hourly or calendar intervals, whichever occurs
first. More frequent service is required when operating in
adverse conditions noted below.
Maintenance Schedule
• Changeengine oil
• Check/clean water inlet screen'
• Check high
pressure hose
Check detergent siphoning hose
Check spray gun and assembly for leaks
• Cleandebris
• Check air filter
• Check engine oil level
• Cleanair filter2
• Change engine oil
• Cleansediment cup
• Check/adjust spark plug
• Service
spark
arrester'
• Clean fuel tank and filter
• Change pump oils
• Replaceair filter_
• Replacespark plug
• Check adjust idle speed4
• Check adjust valve clearance 4
• Cleancumbustion chambeP
• Check fuel tube (replace if
necessary?
Cleanif clogged. Replaceif perforated or torn.
2
Service more often under dirty or dusty conditions.
a
Replacepaper element only.
4
These items should be serviced by your servicing dealer.
s
Changeafter first 50 hours of operationand then every 200 hours or 3 months,
whichever occurs first.
15

Publicidad

Tabla de contenido
loading

Tabla de contenido