Craftsman 580.752381 Instrucciones De Uso página 24

Ocultar thumbs Ver también para 580.752381:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Problem
Cause
Correction
1.
Low pressure spray tip installed.
1.
Replacespray tip with high pressure
Pump has following problems:failure
to producepressure, erratic pressure,
chattering, loss of pressure, low water
volume.
Detergentfails to mix with spray.
Engine runsgood at no-load but "bogs"
when load is added.
Enginewill not start; or startsand runs
rough.
Engine shutsdownduring operation.
Engine lacks power.
Engine"hunts" or falters.
2.
Water inlet is blocked.
3.
Inadequatewater supply.
4.
Inlet hose is kinked or leaking.
5.
Cloggedinlet hose strainer.
6.
Water supply is over IO0°F.
7.
High pressure hose is blocked or
leaks.
8.
Gun leaks.
9.
Spray tip is obstructed.
10. Pump is faulty.
1.
Detergentsiphoning tube is not
submerged.
2.
Detergentsiphoning tube/filter is
clogged or cracked.
3.
High pressure spray tip installed.
Engine speed is too slow.
spray tip.
2.
Clear inlet.
3.
Provide adequatewater flow.
4.
Straighten inlet hose, patch leak.
5.
Checkand clean inlet hose strainer.
6.
Provide cooler water supply.
7.
Clear blocks in outlet hose.
8.
Replacegun.
9.
Cleanspray tip.
10. Contact Searsservice facility.
1.
Insert detergent siphoning tube into
detergent.
2.
Cleanor replacefilter/detergent
siphoning tube.
3.
Replacespray tip with low pressure
spray tip.
Move throttle control to FAST position. If
engine still "bogs down", contact Sears
service facility.
1.
Low oil level.
2.
Dirty air cleaner.
3.
Out of fuel.
4.
Stale fuel.
5.
Spark plug wire not connected to
spark plug.
6.
Bad spark plug.
7.
Water in fuel.
8.
Overchoking.
9.
Excessivelyrich fuel mixture.
10. Intake valve stuck open or closed.
11. Engine has lost compression.
1.
Fill crankcaseto proper level.
2.
Cleanor replaceair cleaner.
3.
Fill fuel tank.
4.
Drain fuel tank; fill with fresh fuel.
5.
Connectwire to spark plug.
6.
Replacespark plug.
7.
Drain fuel tank; fill with fresh fuel.
8.
Open choke fully and crank engine.
9.
Contact Searsservice facility.
10. Contact Searsservice facility.
11. Contact Searsservice facility.
Out of fuel.
Fill fuel tank.
Dirty air filter.
Choke is opened too soon.
Replaceair filter.
Move choke to halfway position until
engine runs smoothly.
24

Publicidad

Tabla de contenido
loading

Tabla de contenido