Risco Industrial LuNAR DT AM Grade 3 Guia De Instalacion página 24

Specifications
Coverage
Variable Mounting Height
RFI immunity
Operating voltage
Current consumption
Alarm and AM contacts
Tamper contacts
Alarm Time
Warm-up time
Optical Filtering for white light
protection
Operating temperature
Storage temperature
Dimensions (Height x Diameter)
The Industrial LuNAR DT AM Grade 3 detector is suitable for use in installations complying with
PD6662, EN50131-1 and TS50131-2-4 Grade 3, Class II.
22
Coverage pattern consists of 192 fingers (96 Fresnel
facets) divided into 3 lens sections.
Each lens section has 4 adjustable vertical positions for
variable mounting height and customized coverage.
360° by 18m (60ft) diameter. When mounting the detector
under 3.7m, the coverage diameter starts to decrease up to
15m (50ft).
From 2.7m to 8.6m (9' to 28'), 4 lens positions according to
installation height
40 V/m from 10MHz to 1GHz
9 to 16VDC
20mA at 12VDC, 30mA at 16 VDC, Maximum 40mA with
all LEDs on.
Opto-relay NC, 100mA, 24 VDC
NC, 500mA, 24 VDC
2.2 seconds
2 minutes
Pigmented Fresnel lens
-20° C to 55° C (-4° F to 131° F)
-20° C to 60° C (-4° F to 140° F)
99mm x 194mm (3.9''x 7.6'')
Industrial LuNAR DT AM Grade 3 Installation Guide