Eaton Cooper lighting Galleon Instrucciones De Instalación

IB506001EN 697916
Installation Instructions – Galleon LED Floodlight
Instructions d'installation – Projecteur à DEL Galleon
Instrucciones de instalación de Lámpara LED Galleon
IMPORTANT: Read carefully before installing fixture.
Retain for future reference.
General: Upon receipt of the fixture, thoroughly inspect
for any freight damage which should be brought to the
attention of the delivery carrier. Compare the catalog
description listed on the packing slip with the fixture label
on the housing to assure you have received the correct
material.
Safety: This fixture must be wired in accordance with
the National Electrical Code and applicable local codes
and ordinances. Proper grounding is required to insure
personal safety. Carefully observe grounding procedure
under installation section.
WARNING
Make certain power is OFF before starting installation
or attempting any maintenance.
N otee: These instructions do not claim to cover all
details or variations in the equipment, procedure,
or process described, nor to provide directions
for meeting every possible contingency during
installation, operation or maintenance. When
additional information is desired to satisfy a
problem not covered sufficiently for user's purpose,
please contact your nearest representative.
This lighting fixture has been shipped complete
N otee:
with one of several mounting options. Please follow
the installation instructions specific to the catalog
part that you ordered.
N otee: Care must be taken not to set lighting fixture down
on optical lenses or lift the fixture in the lens area.
WARNING
Risk of fire/electric shock. If not qualified, consult an
electrician.
WARNING
Risk of Electric Shock – Disconnect power at fuse or
circuit breaker before installing or servicing.
WARNING
Risk of Burn – Disconnect power and allow fixture to
cool before servicing.
WARNING
Risk of Personal Injury – Fixture may become damaged
and/or unstable if not installed properly.
Do not mount luminaire within 6" of a
• •
combustible surface.
Do not handle luminaire by the glass. Do not
• •
touch LEDs.
N otee: Specifications and dimensions subject to change
without notice.
APPLICATIONS: This lighting fixture is designed for
outdoor lighting services, and should not be used in area
of limited ventilation or inside high ambient temperature
enclosures. It must be stored in a dry location prior to
installation. Do not expose lighting fixture to rain, dust or
other environmental conditions prior to installation and
insertion of photo control or shorting cap (if so equipped).
Do not install the fixture near combustible materials or
locate next to airflow blocking surfaces within 6 inches.
Best results will be obtained if installed and maintained
according to the following recommendations.
Brand Logo
reversed out of
black
INS # INS # INS #