Ce Conformity Declaration - Multiplex RX-5-SYNTH IPD CAR Manual De Instrucciones

! These operating instructions are an integral part of this
product. They contain important information and safety
notes, and should therefore be kept in a safe place at all
times. Be sure to pass them on to the new owner if you ever
dispose of the product.
1. S
PECIFICATION
RX-5 SYNTH IPD CAR
Order No.
Servo channel count
Reception system
Sensitivity
Current drain
Operating voltage
Permissible operating
temperature range
Aerial length
Dimensions L x W x H
Weight
1)
41 MHz for export only; prohibited in Germany
2)
A low-voltage power-on guard prevents the receiver operating if
switched on with a voltage below 4.5 V. Once operating, the re-
ceiver works without problem down to a voltage of 3.5 V.
2. S N
AFETY OTES
! Read the instructions before using the receiver for the
first time
! Use the receiver for its intended application only (
! Be sure to use a power supply of adequate capacity
( 7.)
! Read and observe the installation notes (
! Carry out regular range checks (
! Keep strictly to the following sequence when switching
on and off: First switch the transmitter ON, then switch the
receiver ON First switch the receiver OFF, then switch the
transmitter OFF
! Note regarding mixed operation
MULTIPLEX RX-SYNTH receivers can also be operated in
conjunction with transmitters not exploiting Synthesizer tech-
nology, i.e. those using conventional plug-in crystals. Syn-
thesizer technology simply provides a modern, convenient,
extremely flexible and highly accurate method of generating
a frequency.
All MULTIPLEX RX-SYNTH IPD receivers work on the basis
of the FM / PPM transmission process, which is compatible
with most other makes of RC equipment. This means that
mixed operation with FM/PPM transmitters of other makes is
possible in principle. However, we cannot guarantee that
such a system will work perfectly, as there are too many
possible combinations for us to check.
MULTIPLEX Modellsport GmbH & Co.KG • Neuer Weg 2 • D-75223 Niefern-Öschelbronn • www.multiplex-rc.de
Operating Instructions
RX-5 SYNTH IPD CAR receiver – Software V 1.1x
1)
40/41 MHz
# 5 5896
5
FM/PPM single conversion with IPD
(Intelligent Pulse Decoding)
approx. 2 µV
approx. 20 mA (excl. servos)
2)
⇒ 4 – 5 NiCd / NiMH
3.5 ... 7.5 V
cells
- 15°C ... +55°C
450 mm
approx. 44 x 29 x 17 mm
approx. 21 g
21.)
22.)
3. S F
PECIAL EATURES
•
PLL synthesizer receivers, requiring no plug-in crystals.
•
Quick, simple change of RF channel using automatic chan-
nel search, with Lock-on security by confirmed channel ac-
ceptance from the transmitter.
•
Use of standardised FM/PPM transmission format ensures
compatibility with other makes of equipment
•
IPD decoder (Intelligent Pulse Decoding) with HOLD and
FAIL-SAFE functions
•
Error counter
4. I A
NTENDED
The RX-5 SYNTH IPD CAR receiver is designed exclusively for
use as a radio control receiver for model sport applications. Its
use in man-carrying vehicles or industrial apparatus is prohib-
ited.
5. CE C
ONFORMITY
MULTIPLEX Modellsport GmbH & Co.KG declares that these
devices fulfil the requirements of the following harmonised direc-
tives of the European Union (EU):
•
Protection requirements concerning electro-magnetic com-
patibility
EN301 489
•
Measures for the efficient use of the radio frequency spec-
trum
EN300 220
6. Q S
UICK TART
1. Switch transmitter on.
2. Connect the receiver battery to the receiver and switch on.
⇒ LED flashes (RF channel search):
4.)
LED Code 2
The RF channel search is concluded when the LED glows
constantly:
LED Code 1
3. Move any transmitter stick four times steadily to one end-
point. ⇒ the LED must switch OFF / ON in time with the stick
movement.
4. The RF channel setting procedure is concluded; the LED
flashes:
LED Code 5
5. Switch the receiver OFF, then ON again.
⇒ The receiver is ready for use; the LED flashes:
LED Code 3
PPLICATION
D
ECLARATION
1,6 sec
LED ON
1,6 sec
1,6 sec
Seite 1/6