Start-Up; Battery Operation; Operation Via Usb; Setting The Time - ADE CK 1718 Instrucciones De Operación

Start-up

To operate the device, you can use either two batteries LR6 (AA)/1.5 V or the USB interface.

Battery operation

In battery-only operation, only few functions are available.
1. Push the locking tab of the battery compartment towards the battery compartment
cover and remove it.
2. Insert the 2 batteries as indicated at the bottom of the battery compartment. Pay
attention to the correct polarity of the batteries (+/-).
3. Put the battery compartment cover back in place.

Operation via USB

1. Use one end of the USB cable to plug into the 5V1A connection socket.
2. Use the other end to plug into the USB connection socket (for example, your PC), or
use the included USB power adapter to plug the device into a mains outlet.

Setting the time

As soon as the device is powered, beeps will sound and the display will show "0:00".
When the device is connected to a USB power source, all colours will be shown briefly
in succession.
If there is more than approx. 30 seconds between two pushes of a button,
the setting process automatically ends and you will have to repeat it.
1. Press and hold down the
2. Use the or
‚ If you select the 12-hour time format, morning hours are marked with
"AM" and afternoon hours with "PM" in the display.
‚ Press and hold down the
the displayed values.
3. Press again to confirm the setting.
The hour will flash in the display.
4. Use the or
5. Press again to confirm the setting.
The minute will flash in the display.
Wake-Up Light CK 1718
button until "24 Hr" or "12 Hr" appears on the display.
button to set the desired frame format.
button to set the current hour.
or button to speed up the progress of
Start-up
29