Light Functions; Lighting And Mood Light; Display Illumination; Using The Sleeptimer (Auto-Off) - ADE CK 1718 Instrucciones De Operación

Light functions

Lighting and mood light

1. Press to switch on white lighting.
2. Use the or
3. Press again to switch to the coloured mood light.
4. Use to select the desired colour ("C 1" to "C 8"). At "C 8", a slow and constant light
change takes place from colours "C 1" to "C 7".
5. Use the or
("L 00" to "L 05").
6. Press to switch off lighting.

Display illumination

If you use a battery-only operation, only short-term display lighting will be
available as a light function. Press
8 seconds.
When the device is powered via the USB cable, the display will be permanently lit.
− Press repeatedly to select the different brightness levels for the display.
The display brightness can only be adjusted when no light or white light is
switched on. In coloured light ("C 1" to "C 8"), it does not work.

Using the sleeptimer (auto-off)

After a set time, lighting or radio or both will switch off automatically depending on
what functions are enabled.
1. Switch on the radio or light or both.
2. Press the button repeatedly to select the desired time value. You can choose
between 15 - 30 - 45 - 60 minutes and "OFF".
After the set time has elapsed, the device switches off automatically.
‚ If the timer is active,
‚ If you want to disable the function again, select "OFF" instead of a time
value.
‚ While the timer is running, you can always check how long it will take
the device to switch off automatically by pressing
Wake-Up Light CK 1718
button to set the desired brightness ("L 00" to "L 18").
button to set the desired brightness of the selected colour
flashes in the display.
to illuminate the display for approx.
. Note the display.
Light functions
31