Repeat alarm (snooze function)
− Press
once when the alarm signal sounds.
The alarm signal will be muted and Z
8 minutes, the device switches on again and wakes you up again.
This procedure can be repeated multiple times.
Turning the alarm off completely
− Set the right slide switch on the back of the device to .
The alarm symbol
disabled.
Cleaning
1. Disconnect the USB power adapter from the base station.
2. Wipe clean the device with a slightly damp cloth, if necessary.
Fault/Remedy
Fault
Some functions are not available.
The wake-up light will go on immediately
after setting and enabling an alarm time.
Declaration of Conformity
Waagen-Schmitt GmbH hereby declares that the wake-up light CK 1718 complies with
EU directives 2014/53/EU and 2011/65/EU.
The full text of the EU conformity declaration is available via the following Internet
address: www.ade-germany.de/doc
This declaration loses its validity if any modification is made to the item that has not
been agreed with us in advance.
Hamburg, April 2018
Waagen-Schmitt GmbH
Wake-Up Light CK 1718
will appear flashing on the display. After
Z
will disappear from the display and the alarm function will be
Possible Cause
Operate the device via the supplied USB
cable to be able to use all functions.
The alarm time is within the next
30 minutes. No fault. As a remedy, set
"L 00" as the brightness level when
awakening, if necessary (light function
is disabled).
Cleaning
35