Control Panel - Danby DAC080B6IWDB-6 Manual Del Propietário

OPERATING INSTRUCTIONS

CONTROL PANEL

1. WIRELESS CONNECT: Press to activate the wireless connection feature.
2. TIMER: Press to activate the timer feature.
3. ECO: Press to activate the ECO feature.
4. MODE: Press to set the desired mode.
5. TEMPERATURE CONTROL BUTTONS: Press to change the temperature setting. Press and hold the
temperature control buttons at the same time for 3 seconds to change the temperature scale being
displayed. The temperature can be set between 16 - 30°C (60 - 86°F).
6. FAN: Press to set the desired fan speed.
7. SLEEP: Press to activate the sleep feature.
8. SWING: Press to initiate the auto swing feature. Press again when the louver reaches the desired angle.
Press and hold the swing button for 3 seconds to reset the fi lter after cleaning.
9. ON/OFF: Press to turn the appliance on or off.
MODE
Press the mode button to choose the desired mode.
Auto
Auto mode will automatically set cooling or fan only
operation based on the current temperature in the
room. Fan speed cannot be adjusted in this mode.
Cool
Choose cool mode to set the cooling function.
Use the temperature control buttons to choose the
desired temperature. The fan speed can be adjusted
by pressing the fan button.
Dry
Choose dry mode to set the dehumidifying function.
Condensed water will drain out the back of the unit.
Fan speed cannot be adjusted in this mode.
Fan
Fan mode will run the internal fan without engaging
the cooling function. The fan speed can be adjusted
by pressing the fan button.
19
3s