Inappropriate materials:
Heat-resistant glass, ceramic container, copper, aluminum pans/pots.
Inappropriate shapes:
• Flex Induction Mode: Rounded-bottom pans/pots with bottom measuring less than 14cm.
• Other mode: Rounded-bottom pans/pots with bottom measuring less than 14cm.
Roundet
Aluminium or
Bottom Pot
Copper Pot
The output of the induction cooker may vary according to the chosen utensil size and material.
The induction cooker can detect cookware automatically. Please test your cookware: place the chosen cookwa-
re in the heating area. If the LED display relevant to the cooking area remains unchanged or when the buzzer
remains silent, this means that the cookware is suitable for this induction cooker. Under single mode or dual
hob mode, if E0 occurs, and the buzzer sounds, this means that the cookware is inappropriate for this induc-
tion cooker. The cooker automatically switches off after 30 seconds.
There may be sounds when using cookware with a multi-ply bottom. This is due to the rattling of different
materials in different cooking zones. Choosing appropriate cookware may reduce this problem.
Sharp piercing sound: When using cookware made of two different materials in adjacent areas on the hotplate
during Flex Induction or dual hob mode, a sharp piercing sound may be heard, which is caused by different
vibration frequencies in the heating zone. Choosing appropriate cookware may reduce this problem.
• Before cleaning, disconnect plug and wait until the appliance is cooled down completely.
• If dirty pots/pans are used, discoloration on the cooking zones may result.
• Do not use benzene, thinner, scrubbing brush or polishing powder to clean the induction cooker.
• Wipe using a damp cloth with dish washing detergent.
• Use a vacuum cleaner to clear the dust from the air intake and exhaust vent.
• Never run water over the unit (the induction cooker may malfunction if water enters its interior).
Deep-frying Pot
Pot with Stands
Cleaning and Care
Ceramic Pot
Heat-Resistant
Pot
12