Coleman 5155B Instrucciones De Uso página 7

To Light
continued
■ Screw propane cylinder into
lantern. Take care not to cross-
thread. Hand tighten only.
■ Set legs of base in outer position.
■ Set lantern into base.
CAUTION
• SERVICE SAFETY
•
Keep all connections and fit-
tings clean. Inspect propane
cylinder and lantern propane
connections for damage before
attaching.
•
During set up, check all con-
nections and fittings for leaks
using soapy water. Bubbles indi-
cate a leak. Never use a flame.
Match Light Lantern
■ Push lighted match through light-
ing hole, hold near mantle and open
fuel valve fully.
WARNING
• BURN HAZARD
•
Never leave lantern unattended when hot or in use.
•
Keep out of reach of children.
INSTASTART™
Electronic Ignition Lantern
■ Turn fuel valve on. The valve will
click and a spark will jump between
electrodes and ignite the mantles.
7