Playback; Dvd Menu; Resume Playback; Pause - Sylvania LD200SL8 Manual Del Usuario

O
PERATING DVD
These operations are accessible by remote control. Some may also be accessible by controls on the main unit.

Playback

Before you begin:
Turn on the amplifi er and any other equipment which is connected to this
unit. Make sure the external audio receiver are set to the correct input
mode.
1
Press [POWER] to turn on the unit.
2
Insert a disc with label facing back from the left side of
the unit.
• In case the DVD was recorded on both sides, make
sure the label of the side you want to play back is
facing back.
• The unit switches to the DVD mode when the unit
was in TV mode.
3
Press [PLAY B]. Playback will start.
• If playback does not start automatically,
press [PLAY B] again.
4
Press [STOP C] to stop playback temporarily.
• If playback remains stopped for 5 minutes, the screen
saver program will activate automatically, when
"SCREEN SAVER" is set to "ON".
5
Press [EJECT] to eject the disc.
28
EN
Note:
• " " may appear at the top-right on the TV
screen when the operation is prohibited by
the disc or this unit.
• Some DVD may start playback from title 2 or 3 due to specific
programs.
• During the playback of a 2-layered disc, pictures may stop for
a moment. This happens while the 1st layer is being switched
to the 2nd layer. This is not a malfunction.

DVD Menu

DVD
Some discs contain disc menus which describe the contents of the disc or
allow you to customize disc playback, or title menu which lists the titles
available on the DVD.
Press [MENU] to call up the disc menu.
Use [Cursor K / L / s / B] to select an item, then press
[ENTER] (or [PLAY B]).
Note:
• Menu operations may vary depending on the disc.
Refer to the manual accompanying the disc for more details.

Resume Playback

Press [STOP C] during playback.
Resume message will appear on
the TV screen.
Press [PLAY B]. Playback will
resume from the point at which
playback was stopped.
Note:
• To cancel resume, press [STOP C] one more time in the stop
mode. On some discs, [STOP C] will not work while the resume
message appears. Please wait until the message disappears.
• For MP3 files, playback will resume from the beginning of the
current file.
• The resume information will be kept even when unit is turned
off. However, ejecting the disc will cancel the resume feature.
Playback will start at the beginning the next time you insert
the disc.

Pause

Press [PAUSE F] during playback.
• Playback will be paused and sound will be
muted.
To continue playback, press [PLAY B].
Resume ON
Press 'PLAY' to play from here.
To play the beginning,
press 'STOP' first and then 'PLAY'.