GE 66126283 Manual Del Propietario E Instrucciones De Instalación página 13

ATTACH EXHAUST HOSE
8
TO WINDOW SLIDER
A Insert the round end of the exhaust hose
into the exhaust adapter in the window
slider and turn it to lock it in place.
Adapter
• The exhaust hose must be properly
B
installed to the back of the unit and to
the exhaust adapter, and exhausted to
the outside when using the unit in the
COOL mode by sliding it down in
position.
• Attach the unit end of the exhaust hose
to the back of the air conditioner.
Back of unit
Installation Instructions
13
ATTACH EXHAUST HOSE
8
TO WINDOW SLIDER (CONT.)
IMPORTANT: To ensure proper
cooling, do not kink, pinch, shorten
or lengthen the exhaust hose. The
minimum length of the exhaust
hose is 20" (50 cm) and the
maximum length of the exhaust
hose is 78" (200 cm).
An excessive number of bends in the
exhaust hose may compromise the
cooling performance.