Snapper BL48 Manual Del Propietário página 10

ASSEMBLY
ASSEMBLING THE BLOWER TUBE (See Figure 2 - 3.)
W A R N I N G
To prevent accidental starting that could cause serious personal injury, always
remove the battery pack from the tool when assembling parts.
1. Align either of the grooves in the tube with the tabs on the blower
housing. Push the tube into the blower housing until the tab engages the
grooves.
Turbo
2. Turn the tube in the direction of the arrow until both of the tabs slide into
the lock positions.
Groove Tab
Lock Position
10
Fig. 2
Fig. 3