OPERATION
CHARGE BEFORE FIRST USE
W A R N I N G
Always remove battery pack from the product when you are assembling parts,
making adjustments, cleaning, or when not in use. Removing battery pack will
prevent accidental starting that could cause serious personal injury.
STARTING/STOPPING THE BLOWER (See Figure 5.)
• Ensure that the battery is installed in the blower.
• Squeeze the trigger to start the blower.
• Release the trigger to stop.
USING CRUISE CONTROL LEVER (See Figure 5.)
This blower is equipped with a cruise control function. Please read and
understand the function of the cruise control lever.
• Squeeze the trigger to start the unit.
• Once the unit is on, push back the lever clockwise to increase the speed.
This will lock the speed at the desired setting.
• To decrease the speed, push the lever counter clockwise to decrease the
speed to the desired setting.
NOTE: If you decrease the speed all the way, the unit will shut off and step
one will need to be repeated.
USING TURBO BUTTON (See Figure 5.)
This blower is equipped with a turbo button. Please read and understand the
function of the turbo button.
• Squeeze the switch trigger to start.
Lock Position
12
Fig. 4