Philips PT937 Manual Del Usuario página 15

Note: Make sure that the projections of the shaving heads fit exactly into the
recesses.
A
B
10
Note: If the shaving unit does not close smoothly, check if you have inserted
the shaving heads properly and if the retaining frame is locked.
11
Be careful not to hit the shaving unit against anything while shaking off
excess water.
Never dry the shaving unit and the hair chamber with a towel or tissue,
as this may damage the shaving heads and the coupling spindles.
12
Cleaning the trimmer under the tap
Clean the trimmer every time you have used it.
8 Put the shaving heads back into the shaving unit.
9 Put the retaining frame back into the shaving unit (A) and turn the
lock clockwise (B).
Insert the lug of the shaving unit into the slot in the top of the shaver.
Then close the shaving unit.
Shake off excess water.
Open the shaving unit again and leave it open to let the shaver dry
completely.
1 Switch off the shaver and disconnect it from the mains.
2 Push the trimmer slide downwards to open the trimmer.
ENGLISH
15