Braglia DATA-MATE 200.302.77 Manual De Instalación De Montaje página 38

6.4.3 RESETTING
Riempimento
Correzione Livello
Azzeramenti
Ampiezza di lavoro
DATA-MATE displays useful information for operators: working time, litres supplied, distance covered and area sprayed. The index of the partial coun-
ter of each unit is "0". The index of the total counter is "TOT". From this menu, you can reset partial and total counters. These values are active when
DATA-MATE is turned on and are memorised even after the device is turned off. This information cannot be saved on a USB flash drive.
- Select the unit to reset and press
- Select PARTIAL or TOTAL and press
- To confirm resetting, select YES and press
DATA-MATE allows you to reset the partial counter of the unit calculated (working time, litres supplied, distance covered and area sprayed) in display
mode and without having to open this menu.
- Stop the counter (time, litres supplied, distance and area) by holding
start flashing;
- Hold down for 5 seconds (second beep) to reset the partial counter currently displayed without having open the Resetting menu.
6.4.4 WORKING WIDTH
Riempimento
Correzione Livello
Azzeramenti
Ampiezza di lavoro
To calculate the hectares sprayed and the l/ha spraying rate, set the working width in metres. This value establishes the working width of sprayers
when working between rows and the width of the bar when working in open fields. The default setting is 3 m.
- Select WORKING WIDTH and press
- Select WIDTH and press
- To enter a setting press
- Press to save your setting.
200.1012.15
LAVORO
;
;
.
LAVORO
;
;
or ;
Tempo
Distanza
Superficie
Volume
down for 3 seconds (until you hear the first beep). The parameter will
AMPIEZZA DI LAVORO
Ampiezza
16 / 22
AZZERAMENTI
3.0 m
Rev. 01 01/02/2016