Redial; Connect / Disconnect Ids - Kenwood TK-7180 Manual De Instrucciones

■ D
S
IALING TORED
1 Press the key programmed as Autodial.
• The first entry in the Autodial list appears on the display.
2 Press the <B and C> keys or press the appropriate DTMF key to select
your desired Autodial list number (01 ~ 32).
• If programmed by your dealer, you can also use the
• The stored entry appears on the display.
3 Press the PTT switch to make the call.
■ C
S
LEARING TORED
1 Press the key programmed as Autodial Programming.
2 Press the <B and C> keys, or press the appropriate DTMF key to select
your desired Autodial list number (01 ~ 32).
• If programmed by your dealer, you can also use the
3 Press the A or DTMF # key.
• "DELETE" appears on the display after confirming the entered number.
4 Press the S or DTMF
• The selected memory location is cleared.
R
EDIAL
You can redial the last number you transmitted.
Note: To redial a number, you must use an optional microphone with a DTMF keypad.
1 Press the key programmed as Autodial.
• The first entry in the Autodial list appears on the display.
2 Press the DTMF
number.
3 Press the PTT switch to make the call.
Note: Switching OFF the transceiver power clears the redial memory.
C / D
ONNECT ISCONNECT
Note: To transmit connect/ disconnect IDs, you must use an optional microphone with a DTMF
keypad.
1 Press the key programmed as Autodial.
• The first entry in the Autodial list appears on the display.
2 Connect ID: Press the DTMF
Disconnect ID: Press the DTMF
3 Press the PTT switch to make the call.
DTMF N
UMBERS
DTMF N
UMBERS
key to delete the entry from the Autodial list.
key followed by the DTMF 0 key to display the last called
ID
S
key two times.
key followed by the DTMF # key.
and keys.
and keys.
21