Yakima DryDock Manual Del Usuario página 2

INSTALL YOUR FRONT CARRIER SYSTEM
Front systems are sold separately. Read and follow the
If you are installing one set of towers onto your vehicle, start here, at step 2 OR 3.
TO INSTALL
FRONT TOWERS:
Follow Q Tower instructions
to assemble rack.
• Use M1 and M2 measurements
from the list in Clip box.
• Measure from top of
windshield where paint ends,
to front of Towers.
M2
Determine what works
best for your combined
boat and truck.
1033016C- 2/18
(IF NOT INSTALLED).
instructions that came with the towers.
New Q-TOWER Users:
TO INSTALL REAR
TOWERS ONLY:
Follow Q Tower instructions to
assemble rack.
• Follow M3 measurement from list in
Clip box for distance between towers
on crossbar.
• Use combination of M2 and M4 for
tower location.
• Measure from top of windshield where
paint ends, to front of rear Tower.
M4
+
M2
FOR EXAMPLE:
(LIST)
M2 =
+
M4 = 32"
Tundra Tower Location = 38"
6"
+