Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
INSTALLATION INSTRUCTIONS FOR PART 95-8246HG
Toyota Tundra 2014-up
KIT FEATURES
• Double DIN radio provision
• Painted high gloss black
KIT COMPONENTS
• A) Radio housing trim panel • B) Brackets • C) (4) #8 x 3/8" Phillips screws
A
B
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • 70-1761 - Standard harness or TYTO-01 premium interface
Antenna Adapter: • 40-LX11
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver • Socket wrench
METRA. The World's best kits.
95-8246HG
C
®
metraonline.com
U.S. PATENT # D727,888
Table of Contents
Dash Disassembly ................................................. 2
Kit Assembly .......................................................... 3
CAUTION!
All accessories, switches, climate controls panels,
and especially air bag indicator lights must be connected before
cycling the ignition. Also, do not remove the factory radio with
the key in the on position, or while the vehicle is running.
© COPYRIGHT 2017 METRA ELECTRONICS CORPORATION
Publicidad
Tabla de contenido
Manuales relacionados para Metra 95-8246HG
Resumen de contenidos para Metra 95-8246HG
- Página 1 U.S. PATENT # D727,888 INSTALLATION INSTRUCTIONS FOR PART 95-8246HG Table of Contents Toyota Tundra 2014-up 95-8246HG Dash Disassembly ..........2 Kit Assembly ............3 KIT FEATURES • Double DIN radio provision • Painted high gloss black KIT COMPONENTS • A) Radio housing trim panel • B) Brackets • C) (4) #8 x 3/8” Phillips screws WIRING &...
-
Página 2: Dash Disassembly
95-8246HG Dash Disassembly 1. Unsnap and remove the factory climate controls. (Figure A) 2. Remove (4) 10 mm bolts securing the factory radio and remove it. Continue to kit assembly (Figure A) -
Página 3: Kit Assembly
(Figure B) 4. Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the unit for proper operation. (Figure A) (Figure B) 5. -
Página 4: Important
INSTALLATION INSTRUCTIONS FOR PART 95-8246HG IMPORTANT If you are having difficulties with the installation of this product, please call our Tech Support line at 1-800-253-TECH. Before doing so, look over the instructions a second time, and make sure the installation was performed exactly as the instructions are stated. -
Página 5: Toyota Tundra 2014 Y Mas
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 95-8246HG U.S. PATENT # D727,888 Indice Toyota Tundra 2014 y mas 95-8246HG Desmontaje del tablero ..........Ensamble del kit ............CARACTERÍSTICAS DEL KIT • Provisión de radio ISO DDIN • Pintura negra de alto brillo COMPONENTES DEL KIT •... -
Página 6: Desmontaje Del Tablero
95-8246HG Desmontaje del tablero 1. Suelte a presión y quite los controles del clima de fábrica. (Figura A) 2. Quite los (4) pernos de 10 mm que sujetan el radio de fábrica y quítelo. Continúe ensamble del kit (Figura A) -
Página 7: Ensamble Del Kit
(Figura B) 4. Localice el arnés de cables de fábrica en el tablero. Metra recomienda el uso de un adaptador adecuado de acoplamiento de Metra o de AXXESS. Vuelva a... -
Página 8: Importante
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 95-8246HG IMPORTANTE Si tiene dificultades con la instalación de este producto, llame a nuestra línea de soporte técnico al 1-800-253-TECH. Antes de hacerlo, revise las instrucciones por segunda vez y asegúrese de que la instalación se haya realizado exactamente como se indica en las instrucciones.