Kit Assembly - Metra 95-8246HG Guia De Inicio Rapido

Double DIN radio provision
1. Attach the factory panel clips to
the radio housing trim panel.
2. Attach the brackets to the radio
housing trim panel using (4) of
the supplied #8 x 3/8" screws.
(Figure A)
3. Slide the radio into the bracket/
radio housing assembly and secure
to the assembly using the screws
supplied with the radio. (Figure B)
4. Locate the factory wiring
harness in the dash.
Metra recommends using the
proper mating adapter from
Metra or AXXESS. Re-connect the
negative battery terminal and test
the unit for proper operation.
5. Reassemble dash in reverse order
of disassembly.
95-8246HG

Kit Assembly

(Figure A) (Figure B)
3