Using The Commercial Immersion Blender With The Whisk Attachment - KitchenAid KHBC412 Instrucciones

OPERATING THE COMMERCIAL IMMERSION BLENDER
6. When blending is complete, release
the Power/Pulse Trigger before removing
the Commercial Immersion Blender
from the mixture.
7. Unplug immediately after use, before
removing or changing attachments.

Using the Commercial Immersion Blender with the Whisk Attachment

1. Insert the Whisk attachment into
the motor body, twist to lock. The
attachment mark on the whisk should
line up with the bottom of the motor
bell when fully attached.
IMPORTANT: If a piece of food becomes
lodged in the guard surrounding the blade,
follow these instructions:
1. Release the Power/Pulse Trigger and
unplug the Commercial Immersion
Blender.
2. Use a spatula to remove the food
lodged in the plastic guard. Do not use
your fingers to remove lodged food.
3. Plug the Commercial Immersion
Blender back into the electrical outlet
and resume operation.
2. Plug the electrical cord into a grounded
3 prong outlet.
3. Set Commercial Immersion Blender to
your desired speed on the Speed Dial.
11