GYS Flash 7A Manual Del Usario página 8

7 Absorption
8 Analysis
9 Floating
10 Maintenance
• LED indications
The LED 4 (see schema page 28) flashes intermittently from stage1 to 5. Then it will be switched on
continuously from stage 6 to 8 and switch off for the stage 9. During the stage 9, the LED 5 will
switch on.
• Estimated time of charge
Battery
Vehicle
capacity (Ah
4A/7A
Gysflash
2
8
15
The product restarts the charge automatically in the event if a power cut or power supply failure.
Hence, it is ideal to be connected permanently on the vehicle, for wintering cars, bikes, boats ... »
P
ROTECTION
The GYSFLASH is protected against short circuits and polarity reversals. It also has an anti-spark
system to avoid sparks when connecting the clamps to the battery terminals. This charger has a
double insulation and is compatible with the onboard electronics of all vehicles.
Charges the battery up to 100%
Analyse the charge of the battery
Maintain the charge
Starts maintenance charge
Time of
charge from
Vehicle
20 % to 80%
(hours)
4A/7A
Gysflash
2H
6H
11H30
3,6A ± 10%
(4A max)
3,6A ± 10%
(4A max)
14.4V ± 0.1V
14.4V ± 0.1V
14.7V ± 0.1V
13.6V ± 0.1V
13.6V ± 0.1V
13.8V ± 0.1V
Battery
Time of charge from 20 % to 80%
capacity
(Ah)
4A/7A 4A
20 3H30
70 11H
100 Maintenance
130 Maintenance
180 -
230 -
5A ± 10%
(7A max)
5A ± 10%
(7A max)
(hours)
7A
2H
6H
9H
11h30
Maintenance
Maintenance
8/33