USING THE SLIDES 2 PC
1
Plug the USB cable of the SLIDES 2 PC into your computer's USB port. Once connected, the power LED
light will be blue.
Note for Windows users: The first time you connect SLIDES 2 PC to
your computer, wait a few seconds until you see a dialog box that says
"Found New Hardware" (this means the computer recognizes the
SLIDES 2 PC). After you see this, SLIDES 2 PC is ready to use.
2
Insert the loaded film / slide holder properly into the slot
as shown.
4
Click the "folder" icon button and select the location
to save your pictures.
6
or
Click "Snapshot" on the screen or press the COPY button on SLIDES 2 PC.
You can adjust the location of the film by moving the film holder.
The maximum is 12 pictures in the preview area. Press the "Save" button to save the pictures to your
computer.
Note1: To ensure the best image quality, please allow about 5 seconds between snapshots and transfers
for white balance enhancement.
All manuals and user guides at all-guides.com
6
3
Go to Start Menu
All Programs
Film Scanner
Launch ImageScanTool
(PC),
or Applications
ImageScanTool (Mac).
5a
Select the proper film type.
35mm