ION Slides 2 PC Guia Del Usuario página 8

TROUBLESHOOTING
ISSUE
My computer does not
recognize the SLIDES 2 PC.
I get a Windows message
that reads "device not
recognized."
I have a USB 2.0 port on my
computer, but my computer
still won't recognize my
image copier.
My installation disc will not
auto start.
Warning from Windows that
device "has not passed
Microsoft logo testing".
My SLIDES 2 PC is working
but some of my slides or
negatives look overexposed.
There is a black border
around the edge of the
image.
This symbol on the product or in the instructions means that your electrical and electronic
equipment should be disposed at the end of its life separately from your household waste.
There are separate collection systems for recycling in the EU. For more information, please
contact the local authority or your retailer where you purchased the product.
All manuals and user guides at all-guides.com
POSSIBLE CAUSE
SLIDES 2 PC not plugged
into a high-speed USB
port.
All ports on your computer
may not be high speed.
May be a problem with
your CD drive.
This is normal. OK to
continue.
Time for auto exposure
varies according to your
computer configuration.
The slide or film might not
be properly inserted in the
holder, or the holder might
not be fully inserted into
the SLIDES 2 PC.
8
RESOLUTION
Your computer must have a USB 2.0 to
communicate with your SLIDES 2 PC. Check
to see if USB 2.0 is installed on your
computer. If you do not have a USB 2.0
installed on your computer you can upgrade
your USB ports. This hardware is available at
most electronic stores.
Even though you may have USB 2.0 installed,
all of your USB ports may not be USB 2.0
compatible. Check all your USB ports to find
the 2.0 compatible ports.
Check to see if your CD drive is operating
properly. If possible, check another
computer to see if the disc is recognized.
If you are able to browse the contents of the
CD but the installation does not start
automatically, please double-click on
Install.exe.
Choose "Continue anyway".
The image copier will not harm your computer.
(Windows certification is in process for this
software)
The image copier self adjusts to your
slide/negative exposure.
view window to stop adjusting for exposure
and then click "Capture."
Check your slides or negatives to see if they
may have been overexposed when originally
developed. Several photo adjusting software
applications are available to "clean-up" your
newly digitized picture.
Remove the holder from SLIDES 2 PC and
make sure the slide or film is placed correctly
in the holder. Reinsert the holder into SLIDES
2 PC (it should click into place when inserted
properly).
Wait for the live