Yakima DoubleHaul Instrucción página 5

Tabla de contenido

Publicidad

WEIGHT LIMITS • LIMITES DE CHARGEMENT • LÍMITES DE PESO
Rack
A. Unlock and remove the accessory lock and lock plate.
B. Loosen and remove the knobs and clamps.
C. With assistance from a friend, lift the DoubleHaul off of the crossbars and store it in a safe place.
A. Using the 6 mm hex wrench and the
13 x 19 mm open wrench, remove the end cowl
from the front portion of the DoubleHaul.
B. Using the 6 mm hex wrench and the
13 x 19 mm open wrench, install the end cowl
to the rear portion of the DoubleHaul using
the hardware you removed in step (A).
C. Remove the thumbscrew and bolt. Then the
top and bottom mounting plates from the
front portion of the DoubleHaul.
C
D. Install the plates as shown onto the rear portion of the
DoubleHaul and loosely tighten the hardware. Make
sure the bolt head is captured in the underside channel.
D
E. Return to installation step 3.
Instruction #1035940E - Page 5 of 9
DoubleHaul
52 lbs./23.5 kg
REMOVAL • DÉPOSE • DESINSTALACIÓN
HALF SIZE CONFIGURATION • CONFIGURATION DEMI-LONGUEUR •
A
B
=
Not more than
165 lbs. (75 kg) unless
otherwise noted.

Publicidad

Tabla de contenido
loading

Tabla de contenido