Dash Disassembly; Toyota Tacoma 2005-2011; Kit Preparation - Metra 99-8214 Manual Del Usuario

Dash Disassembly 99-8214

Toyota Tacoma 2005-2011

4. Remove the left and right radio
brackets from the radio chassis.
(Figure D)
5. Unclip and remove the clock/
hazard switch assembly from the
factory radio housing trim panel.
(Figure E)
Continue to kit preparation
(Figure D)
(Figure E)

Kit Preparation

1. Attach the clock/hazard switch
bracket to the radio housing using
the (4) #6 x 3/8" Phillips pan
head screws.
WARNING: DO NOT
OVERTIGHTEN SCREWS.
2. Clip the clock/hazard switch
assembly into the 99-8214 radio
housing trim panel. (Figure A, B)
Continue to kit assembly
3
99-8214
Insert clock/hazard switch assembly from rear
of 99-8214 radio housing trim panel
(Figure A)
(Figure B)