1. Unclip and remove the trim panel
from around the climate controls.
(Figure A)
2. Remove (2) Phillips screws
securing the climate controls then
unclip and remove them.
(Figure B)
3. Unclip and remove the a/c vents
above the factory radio. (Figure C)
4. Remove (4) Phillips screws
securing the radio then unclip and
remove the radio. (Figure D)
5. Unclip the four plastic panel clips
from the factory radio and place
them onto the 99-8906
radio trim panel.
Continue to kit assembly
95-8906HG
Dash Disassembly
(Figure A)
(Figure B)
(Figure C)
(Figure D)
2