Ec Declaration Of Conformity - 3M 05846 Manual Del Usario

EC Declaration of Conformity

Manufacturers Name:
Manufacturers Address:
Does hereby declare that the machinery described below complies with those applicable essential health and safety requirements of
the Machinery Directive 98/347/EC; together with all amendments to date.
Description: 3M™ Dynamic Mixing Gun - Pneumatic
3M™ Dynamic Mixing Nozzle
Model Number(s): 05846
05847
The following standards have either been referred to, or complied with, in full or in part as relevant:
EN ISO 12100-1:2003
EN ISO 12100-2:2003
EN 792-10:2000
EN 983:1996
EN 1050:1995
EN 12096:1997
EN ISO 28662-1:1992
EN ISO 4871
EN ISO 15744:2002
Year in which CE mark first affixed
2008
Full Name of responsible person.
Kurt Beinlich
Signature:
3 Automotive Aftermarket Division
3M Center, Building 251
St. Paul, MN USA 55144-1000
Safety of machinery. Basic concepts, general principles for design.
Basic terminology and technical principals.
Hand-held non-electric power tools - Safety Requirements - Part 10: Compression Power Tools.
Safety of machinery. Safety requirements for fluid power systems and components - Pneumatics.
Safety of machinery. Principles for risk assessment.
Mechanical vibration - Declaration and verification of vibration emission values.
Hand-held portable power tools - Measurement of vibrations at the handle - Part 1: General.
Acoustics - Declaration and verification of noise emission values of machinery and equipment.
Hand-held non-electric power tools. Noise measurement code. Engineering method (grade 2).
Position: Technical Director
Date:
3