Gaggenau AI 442 720 Instrucciones De Instalación página 14

Connect the mains cable and control cable to the
control module.
3 For a combination with external remote fan unit
Use the network cable to connect the
AR4.. only:
external remote fan unit and the ventilation hood's
control module. The plug must snap into place.
Connect the mains cable to the control unit.
Note: The X1 and X2 connection sockets are
identical.
14
4 Slide the ventilation hood up into the support frame
from below and hook it into the two angle brackets
.
(a)
Note: Ensure that the mains cable is not trapped.
5 Align the ventilation hood so that it is straight and
use seven screws to fasten the ventilation hood to
the support frame.