Installing The Appliance - Gaggenau AI 442 720 Instrucciones De Instalación

Installing the appliance

1 For recirculation mode units only:
sides of the AA 442 810 air recirculation module.
Slide the air recirculation module into the support
frame from below and hook it in place. Secure it
with two screws.
2
Fit filters to both
For combination with internal remote fan unit
Unscrew the cover plate from the
AR 400 743 only:
ventilation hood: Loosen the four screws, remove
the cover plate and screw the four screws in again.
Slide the remote fan unit into the ventilation hood
from above. Use four screws to secure it in place.
13