Programming Screen - J.P. SELECTA HOTCOLD-UC Manual De Instrucciones

INSTRUCTIONS MANUAL
Segment step
profile
duration
numb
temperature
ºC hh:mm
1-10
J
.P. SELECTA s.a.u.
CODE 80381 REV A

PROGRAMMING screen

Go to PROGRAMMING screen to:
• Set the temperature profiles.
• Set the timed operation for a profile.
(For instance, you can set a time and a week day to start a profile.
F.i.: start, profile n
Profile
start
Programming a temperature profile
A temperature profile is a sequence of steps, also called dells.
Profile parameters input:
• Select the profile number with
• Press on the parameter to be modified (Temp, length ...)
• Press on these icons:
• Modify another parameter.
Special values:
• If you enter INF in Step length, the cabinet remains permanently
at this temperature.
Starting of temperature profile:
• To set the profile starting time, press on «—:—»
• Enter time by pressing
• Press on the week days when the profile should be run.
• Accept the programming by pressing on
Ctra. NII Km 585.1 Abrera 08630 (Barcelona) España
e-mail:selecta@jpselecta.es - web site: www.jpselecta.es
FEBRUARY 2020
1 on Sunday at 19h00')
er
to enter the value.
in hh:mm format.
Tel 34 937 700 877 Fax 34 937 702 362
Pag.: 25
between 0 and 10.
.