Cleaning the filter
• Hold the handle of the air filter firmly and pull it out.
• You can brush the air filter with a soft brush and wash it with water.
• Allow the air filter to dry before reinserting it into the appliance.
Cleaning the filter insert
• Hold the handle of the air filter firmly and pull it out.
• Now remove the paper filter insert.
• Brush the filter insert with a soft brush and rinse with water.
• Allow the filter insert to dry before reinserting it into the machine.
Cleaning the water tank
• Remove the water tank from the appliance and empty the water remaining in the
water tank.
• Clean the water tank and rinse it with a small brush and clean water.
• Fill the water tank with fresh tap water and reinsert it into the appliance.
Note: If there is a plug on the bottom of the water tank, the sewage can be drained
in this way.
Storage
• If the product is not going to be in use for a long time, unplug the power cord and
pack it away to prevent dust from entering the case.
• After packing, store it in a dry, ventilated place.
EN
17