Do Not Overload Outlets/Extension Cords; Cleaning; Dampness, Smoke, Steam, Dust, High Temperature And Direct Exposure To Sunlight; Ventilation - Maxell MP-WU9101B Manual Del Usuario

Warning, Notices, and Safety Instructions

Do not overload outlets/extension cords

Pay attention to the current load of the outlet and cord you are using to prevent fire or electrical shock.

Cleaning

When cleaning the projector, be sure to unplug it from the outlet to prevent electric shock.
Do not use liquid or aerosol cleaners. Use a dry/damp cloth with excessive moisture removed for
cleaning. Be sure to use cleaning cloth designed to clean monitors for the projector to prevent damages
to the projector cabinet due to abrasion.
Dampness, smoke, steam, dust, high temperature and direct exposure
to sunlight
Do not operate the projector in environments where it could be exposed to dampness, smoke, steam,
dust, high temperature or direct sunlight. For example: bathroom, kitchen, around a washing machine,
damp basement rooms, electric heaters or similar environments. Keeping or operating the projector
in the above-mentioned environment could lead to discoloration, mold growth, adhesion of oil, or
damages to the projector.
Do not place the projector where any oils, such as cooking or machine oil, are used. Oil may harm the
product, resulting in malfunction, or falling from the mounted position. Do not use adhesive such as
threadlocker, lubricant and so on.

Ventilation

The projector cabinet is designed with slots and openings to remove the heat inside the projector
so that it will not overheat and damage the components. Be sure to operate the projector in an
environment with ideal ventilation and do not operate it on a sofa, rug or other closed-in environments
that could obstruct ventilation.
Do not touch around the exhaust vents during use or just after use, since it is too hot.

Intrusion of foreign objects

Be sure to keep all foreign objects away from entering the projector because it could be exposed to
hazardous voltages and cause parts to short circuit. This could lead to fire hazard or electric shock.
Examples of foreign objects include: cockroach, screws, liquid and so forth.
In addition, never spill liquid into the projector.

Cooling fluid

When the projector is damaged, cooling fluid may come out of internal radiator or the tank. Never
touch or drink it. When you swallow it or it gets into the eye, consult a physician immediately for
emergency treatment.

Carrying the projector

The projector net weight is 28kg (without the lens). When carrying the projector on a cart,
be sure to handle the cart with care. The projector may fall due to abrupt stops, excessive
jolts, or uneven ground.
6 6
English- English-