Getting Started; Location Of Controls - Alpine X801D-U Guía De Referencia Rápida

Getting Started

Location of Controls

The screen design used in the Owner's Manual may differ from the actual screen.
For X801D-U/INE-W997D
Microphone
Used for Hands-free or Voice Control modes.
For X701D, the microphone is built into the left side of
the monitor.
(AUDIO)/ (Voice Recognition mode) button
Displays the Audio/Visual screen. If the Audio/Visual
screen is already displayed, changes the source.
When a hands-free phone with Voice Recognition is
connected, press and hold for at least 2 seconds to
switch to the Voice Recognition mode.
(MUTE) button (X801D-U/INE-W997D only)
Press to activate/deactivate the mute mode.
/ (DOWN/UP) button (X801D-U/INE-W997D
only)
Press to adjust the volume.
(Favourite) button
Recalls the Favourite screen.
• Press and hold this button for at least 2 seconds
to switch to the Climate screen. (displayed only
on the X801D-U/INE-W997D when connected to
the optional CAN Interface box.)
• Press and hold this button for at least 2 seconds
to switch to Vehicle info mode. (X701D only)
MENU/ (Power Off) button
Recalls the Menu screen.
Press and hold this button for at least 5 seconds to turn
the power off.
4
-EN
All manuals and user guides at all-guides.com
Owner's manual
For X701D
Location of Controls, Turning Power On or Off
/ button
Press to seek down/up a station in radio mode or
down/up a track, chapter, etc., in other audio/visual
sources.
RESET switch
The system of this unit is reset.
(NAVI/NAV) button
Recalls the navigation map screen.
Press again to switch to Navigation menu screen.
Press and hold this button for at least 2 seconds to
change to Go Home route screen. (If Home is not set
yet, it will change to the Home setting screen.)
For details of navigation operations, refer to "Navigation
System OM" in the CD-ROM.
Remote Sensor
Point the remote control transmitter towards the
remote sensor within a range of 2 meters.
(CAMERA) button (X701D only)
Use to display the camera image.
Disc Slot (X701D with DVE-5300X only)
Rotary encoder/MUTE button (X701D only)
Adjust the volume by turning to the left or right.
Press to activate /deactivate MUTE mode.
(Eject) button (X701D with DVE-5300X only)
Ejects a disc.