Klarstein HIGH 10033053 Manual Del Usuario página 26

EN
26
Remote Control
To calibrate the remote control
Press and hold the Power button for 5 seconds to start calibration.
• If the calibration was successful, an acoustic signal sounds.
• If the calibration was not successful, the cooker hood switches to standby mode.
Press button (1) to switch the motor on
1
or off.
Press button (2) to decrease power or
2
speed.
Press button (3) to increase power or
3
speed.
Press the button (4) to turn the light on or
4
off. If only the light is on and
Press the key (5) while the power is
on to activate the off timer. If the timer
indicator in the display flashes, the timer
5
is active. The preset time for the timer is 5
minutes. When the timer has expired, the
cooker hood will automatically turn off.