Publicidad
Idiomas disponibles
Idiomas disponibles
English
General safety requirements
`
`
Read these directions for use carefully before using.
`
`
Keep these directions for use where they will be
accessible for all users.
`
`
Failure to comply with the directions for use shall
render all warranty conditions null and void and
may lead to personal injury and material damage.
`
`
The instrument must only be used by qualified
skilled employees.
Safety instructions before using
`
`
Follow the manufacturer's instructions and safety
instructions of the medium you are filling.
`
`
Damage to the respiratory tract and other organs
due to off-gassing media. Fill only in ventilated
rooms or under a suitable exhaust hood.
`
`
The instrument must only be used within the
confines of applicable material resistance and for its
designated purpose. Any other type of use will affect
the warranty/guarantee.
WARNING!
The instrument is not suitable for highly flammable
or explosive liquids.
`
`
The instrument must only be used within the
confines of applicable material resistance and
for its designated purpose.
NOTE!
Before using, the instrument has to be cleaned to
the extent of your (validated) cleaning process.
`
`
Measures of manual cleaning have to be carried
out in the cleaning/desinfection area and under
consideration of occupational health and safety.
`
`
Pay attention to the material resistance.
Safety instructions during and after use
`
`
The instrument generates overpressure. Possible
bodily injury due to escaping liquids.
`
`
The instrument is not suitable for cleaning in a
dishwasher.
Layout and function
`
`
The instrument consists of a riser pipe with dischar-
ge tube made of polypropylene (PP) and a universal
bung made of PVC.
`
`
The instrument is suitable to fill off highly fluid and
low-viskosity liquids.
`
`
The bung fits onto container openings with a diame-
ter of 20 to 36 mm forming an airtight seal.
Ⓐ Ø 20 - 28 mm
Ⓑ Ø 26 - 36 mm
`
`
The instrument is maintenance-free.
Point out any damage in the packaging to the freight
forwarder/supplier immediately.
Assembly
1. Pull out the telescopic riser pipe completely.
2. Guide the riser pipe with the universal bung
into the container to form an airtight seal.
3. If necessary adjust the universal bung to the
opening diameter of the container.
4. Attach the discharge tube to the sleeve at the
riser pipe.
5. Plug the hand pump ball into the bung.
6. Close the stop-valve (push the lever upwards).
Safe filling
1. Hold the discharge tube above the filling container.
2. Activate the hand pump ball and generate overpres-
sure. Liquid starts to flow.
3. To complete the filling process open the stop-valve
(push the lever downwards) and allow the overpres-
sure to escape.
Publicidad
