Veridian Healthcare 01-514 Manual De Instrucciones página 18

MEMORY FUNCTION CLEARING READINGS
Clearing Measurements from Memory
1. Press and release the M (MEMORY) button. The unit will display how
many measurements are stored within the bank.
2. Select the desired user bank to clear by pressing the
button to switch between U1 and U2.
3. Press and release the M (MEMORY) button two times to advance to
the first measurement in the bank.
4. When the first measurement is on the display (indicated by the 01 at
the lower left of the screen), Fig. 1, press and hold the M (MEMORY)
button until two horizontal lines flash, Fig. 2. This indicates that all
measurements have been erased.
REMINdER: whEN USINg AN AC AdApTER, IT IS
RECOMMENdEd ThAT bATTERIES ARE ALSO
INSTALLEd IN ORdER TO pRESERvE ThE dATE
ANd TIME SETTINgS whEN ThE MONITOR IS
NOT pLUggEd IN TO A pOwER SOURCE.
18 • ENGLISH
POWER
Fig. 1
Fig. 2