Black and Decker HFVB315J Manual De Instrucciones página 4

While charging, the charger may get
warm, this is perfectly normal and safe. It
is safe to leave the appliance connected
to the charger indefinitely. The charger
automatically reduces power consumption
when charging is complete.
WARNING:
the battery at ambient temperatures below
39°F (4°C) or above 104°F (40°C).
ASSEMBLY
MOUNTING ACCESSORIES (FIGURES B - D)
The 2-in-1 nozzle / brush tool (12) has a brush
that can be folded forward for dusting and
upholstery cleaning.
B
The pet hair cleaning tool (14) is for use
when vacuuming pet hair and/or ground-in
debris from carpeted or upholstery surfaces.
WARNING:
Do not use pet hair cleaning tool directly
on animals.
The crevice tool (13) allows for vacuuming
in narrow and hard to-reach places.
• To attach an accessory, press the
accessory clip (11) and slide the
accessory onto the handle (2).
• To remove an accessory, press the accessory
clip (11) and remove the accessory.
C
11
12
To unwrap and extend the handle and hose:
The handle and hose can be unwrapped
from the main appliance for extended reach
when cleaning. Grab the handle and lift
upwards. Unwrap the handle and hose from
Do not charge
Injury to pets.
2
the main appliance. The hose can extend
up to approximately 4 feet (1.21m).
To place the handle and hose back onto
the main appliance, wrap the hose back
underneath and around the vac making
sure that the hose fits between the two
"feet" of the appliance. Align the handle
with its cradle and click back into place.
The handle (2) can be removed from
the hose allowing the accessories to be
connected directly to the hose cuff (17)
when desired.
To remove the handle:
• Unclip the handle (2) from the appliance.
• Rotate the locking ring (3) counterclockwise
to release the clips.
• Pull the hose away from the handle.
• Fit the accessory directly to the hose cuff (17).
To refit the handle:
• Remove the accessory from the hose.
• Push the hose into the handle (2). Rotate
locking ring (3) clockwise until it clicks
into place.
D
OPERATION
SWITCHING ON AND OFF (FIGURE E)
• To switch the appliance on, slide the on/
off switch (1) to the right until it clicks into
the on position.
• To switch the appliance off, slide the on/
off switch to the left until it clicks into the
off position.
E
4
17
2
13 17