Ec Declaration Of Conformity - Vimar Elvox EIM1 Manual Para El Conexionado Y El Uso

HIDDY
(Declaration of incorporation of partly completed machinery Annex IIB Directive 2006/42/EC)
The undersigned, representing the following manufacturer
herewith declares that the products
Articles
are in conformity with the provisions of the following EU Directive(s) (including all applicable amendments) and that all of the
following standards and/or specifications have been applied
EMC Directive 2004/108/EC:
Machinery Directive 2006/42/EC
He also declares that the product must not be commissioned until the end machine, in which it is to be incorporated, has been
declared in conformity, when applicable, with the provisions of Directive 2006/42/EC.
He declares that the relevant technical documentation has been constituted by Elvox SpA, drawn up in accordance with Annex
VIIB of Directive 2006/42/EC and that the following essential requirements have been fulfilled: 1.1.1, 1.1.2, 1.1.3, 1.1.5, 1.1.6,
1.2.1, 1.2.2, 1.2.6, 1.3.1, 1.3.2, 1.3.3, 1.3.4, 1.3.7, 1.3.8, 1.3.9, 1.4.1, 1.4.2, 1.5.1, 1.5.2, 1.5.4, 1.5.5, 1.5.6, 1.5.7, 1.5.8, 1.5.9,
1.6.1., 1.6.2, 1.7.1, 1.7.2, 1.7.3, 1.7.4.
He undertakes, in response to an adequately justified request from the national authorities, to present all the necessary
supporting documentation concerning the product.
Campodarsego, 06/05/2013
Note: The contents of this declaration match what was declared in the latest revision of the official declaration that was available before this manual was printed.
This text has been adapted for editorial purposes. A copy of the original declaration can be required to Elvox SpA
EN

EC DECLARATION OF CONFORMITY

No.: ZDT0044400
Elvox SpA
Via Pontarola, 14/A - 35011 Campodarsego
(PD) Italy
ACTUATORS FOR SWING GATES - HIDDY SERIES
EIM1 (HIDDY 200D)
EN 61000-6-1 (2007), EN 61000-6-3 (2007) + A1 (2011)
EN 60335-2-103 (2003) + A11 (2009)
EN 13241 (2003) + A1 (2011), EN 12453 (2000)
The Chief Executive Officer
19