Ec Declaration Of Conformity - Vimar EIM2 Manual Para El Conexionado Y El Uso

Ocultar thumbs Ver también para EIM2:

Manual para el conexionado y el uso (33 páginas)

Contenido

página de 33

/ 33
Contenido
Tabla de contenido
Marcadores

Tabla de contenido

Idiomas disponibles

HIDDY 350A

(Declaration of incorporation of partly completed machinery annex IIB Directive 2006/42/EC)

The undersigned, representing the following manufacturer

herewith declares that the products

Articles

are in conformity with the provisions of the following EC directive(s) (including all applicable amendments) and that the

following standards and/or technical specifications have been applied:

LV Directive 2006/95/EC:

EMC Directive 2004/108/EC:

Machinery Directive 2006/42/EC

Further hereby declares that the product must not be put into service until the final machinery into which it is to be incor-

porated has been declared in conformity with the provisions of Directive 2006/42/EC, where appropriate.

Declares that the relevant technical documentation has been compiled by Vimar SpA in accordance with part B of Annex

VII of Directive 2006/42/EC and that the following essential requirements of this Directive have been applied and fulfilled:

1.1.1, 1.1.2, 1.1.3, 1.1.5, 1.1.6, 1.2.1, 1.2.2, 1.2.6, 1.3.1, 1.3.2, 1.3.3, 1.3.4, 1.3.7, 1.3.8, 1.3.9, 1.4.1, 1.4.2, 1.5.1, 1.5.2,

1.5.4, 1.5.5, 1.5.6, 1.5.7, 1.5.8, 1.5.9, 1.6.1., 1.6.2, 1.7.1, 1.7.2, 1.7.3, 1.7.4.

I undertake to make available, in response to a reasoned request by the national authorities, any further supporting pro-

duct documents they require.

Marostica, 04/12/2017

Note: The contents of this declaration correspond to what declared in the last revision of the official declaration available before printing

this manual. The text herein has been re-edited for editorial purposes. A copy of the original declaration can be requested to Vimar SpA.