Installation Guide; Grounding Instructions - mabe HMM110BIZ Manual De Uso Y Cuidado

24

installation guide

• Make sure that all the packing materials are removed from the in-
side of the door.
• Check the oven for any damage, such as misaligned or bent door,
damaged door seals and sealing surface, broken or loose door
hinges and latches and dents inside the cavity or on the door. If
there is any damage, do not operate the oven but contact quali-
fied service personnel.
• This microwave oven must be placed on a flat, stable surface to
hold its weight and the heaviest food likely to be cooked in the
oven.
• Do not place the oven where heat, moisture, or high humidity are
generated, or near combustible materials.
• For correct operation, the oven must have sufficient airflow. Allow
20 cm of space above the oven, 10 cm at back and 5 cm at both
sides. Do not cover or block any openings on the appliance. Do not
remove feet on which oven stands.
• Do not operate the oven without glass tray, roller support, and
shaft in their proper positions.
• Make sure that the power supply cord is undamaged and does not
run under the oven or over any hot or sharp surface.
• The power plug must be readily accessible so that it can be easily
unplugged in an emergency.

grounding instructions

This appliance must be grounded. In the event of an electrical short
circuit, grounding reduces risk of electric shock by providing an es-
cape wire for the electric current.
WARNING: IMPROPER USE OF THE GROUNDING
PLUG CAN RESULT IN A RISK OF ELECTRIC
SHOCK.
Electrical Requirements
The electrical requirements are a 110 Volt 60 Hz AC only, 20 amp. It
is recommended that a separate circuit serving only the oven be
provided. The oven is equipped with a 3-prong grounding plug. It
must be plugged into a wall receptacle that is properly installed and
grounded.